I am using a Fluke 5500 Calibrator and the CAL-4353 to attempt the calibration of some NI PXIe-4353 cards. I am trying to follow the calibration procedure, but am running into some road blocks. The first problem is I can't "calibrate" the unit. I go into NI Max and find my unit. When I right click on it to configure, it reads the CAL-4353, but everything is grayed out and I can't execute the calibrate function. The other problem that I am having is I don't know where the SC Express Calibration Accessory Channels VI are recalled from. The procedure states " Call the DAQmx Connect SC Express Calibration Accessory Channels VI. Configure the CAL-4353 by setting the connection to _tc_calibration and the physical channels to Dev1/ai0:31". Throughout the procedure it is wanting me to configure the CAL-4353 and I don't know how to do that. Any assistance would be greatly appreciated.
I have written the code, but it is not working as I hoped. I am getting an error at the out of the Calibration Accessory Channels VI (error -200112) and at the end of the code (error -50103). I posted it as a different question (Cal-4353 Calibration) because I think once that works out it will answer all my questions about the PXIe-4353. Once I get everything working I will share my findings.