NI VeriStand - Get Single Channel Value

[mihamm]

Hello everyone
I want to read an NI VeriStand Workspace channel via LabView. The hardware for this is on an NI PXI system.
I can't read the channel with the VI shown, what could be the fault? I get error 1172 in the "Open Workspace Manager Reference" Block.
Can you tell me where the error lies, or is there good guidance for making the project working?

Regards

[hovo90]

Hi,

Could you please share the screenshot of error message?

Best regards

[mihamm]

Hi,

thanks for your answer.

I get the following Error Message:

The IP-Adress is the one i get from NI-MAX for my PXI-System.

Best regards.

[hovo90]

What PXI are you using?

You need to download the users manual and need to correct your remote connection options.

Best regards

[mihamm]

Hi,

i have the PXIe-1082 Chassis with a PXIe-8880 Controller.

Are there some informations about this in the users manual?

Where can I setup the remote connection options?

Thanks and Best regards.

[hovo90]

In links below you can find the users manuals for your devices.

https://www.ni.com/pdf/manuals/372752c.pdf

https://www.ni.com/pdf/manuals/374684c.pdf

Have fun

[mihamm]

Thanks for the links. But i still don't understand what settings i should make and where. I have been working with the PXI system remote via VeriStand for almost 2 years, so where should I make settings on the remote options? Also in the manuals I do not find suitable topics for it.
Thank you for your help
Regards

[hovo90]

Here is another a link of Getting started for PXIe-8880.

https://www.ni.com/documentation/en/pxi-chassis/latest/1082/default/

In documents you need check out, that the remote connection options in NI MAX are correct and if needed correct them.

Best regards

[mihamm]

Hi,

thanks for your explanations, but unfortunately dont get at all, what you mean exactly.

Could you maybe send a screenshot of the connection options in NI MAX?

Best Regards 

[hovo90]

Sorry, but I do not have installed connected and installed any device, so I can't send you a screenshot.

The previous link was incorrect, here is what I wanted to send.

Read carefully the documents, there are all explanations and sequence of installing and configuring the devices with it's drivers and softwares.

https://www.ni.com/pdf/manuals/374778b.pdf 

Best regards