From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-26-2019 09:20 AM
Hi All,
I am trying use telnet to communicate with a device using Teststand 2010 and I am not getting any response back read the results and displaying it in Teststand. Any help would be greatly appreciated. All my setup are correct and compare them with instructions given by NI.
Thanks,
WJ
03-28-2019 07:07 AM
Hello justin1269,
I know that you mentioned that all the configuration is done as expected, but can you please share with us the steps you follow?
03-28-2019 08:12 AM
Hi JKarma,
Thanks for the reply. See the picture below for my setting
Thanks,
WJ
03-28-2019 08:28 AM
If you run this step, what returns? Can you just ping the device directly to see if you are able to communicate with it in general?
04-03-2019 06:35 AM
Hi,
I am able to get a response from the device via Telnet window, but not displaying anything returning into TestStand.
Thanks,
Willer