Benchtop Measurement and Test
Distributed Measurement and Control
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
I have a sequence (Calibration - MLC) with parameter values.
And my concern is the EL_Correction_Fact that is not passed correctly into the VI.
Then in Calibration VI, I pass all these parameters as input.
But when I debug and stop when the Calibration VI opens then I don’t see the same values passed into the Calibration VI.
The Calibration VI With Parameter In and Out looks like this
Go to Solution.
I’d suggest double checking the cluster passing settings of that typedef
I have checked that the Cluster passing is on.
I also saw that each sequence parameter is loaded from Local. So I changed the Local Parameter to 90.
But still, I got a 98 in my VI.
I've checked the variables when it reached the sequence (before entering) Then the Local Calibration Parameter is 98 and not 90 as I set it to be...
How is this posable?
I found the issue.
Parameters are loaded by Locals, and locals get values from a property loader in an Excel file.
What do you need our team of experts to assist you with?
We'll be in touch soon!