NI Labs

cancel
Showing results for 
Search instead for 
Did you mean: 

Welcome to EtherNet/IP Driver for Communication to Allen Bradley ControlLogix PLCs

Eric,

This was just a question to make sure that this was not a problem. I was getting this error message (Error -251723767 occurred at EthernetIP Tag Read REAL.vi;
Details: Unable to connect to the network path specified
) so This prompted the question. I guess I still don't have the proper information in the IP address input. this is what I have so far (10.6.82.10,1769,1769-L35E) I am not totally sure about the backplane port address. I believe there is something missing after the 1769 value. I didn't program the PLC so I currently have been trying to get this information from the vender who supplied the PLC.

WD Maas

0 Kudos
Message 31 of 193
(12,119 Views)

Can you describe your PLC configuration? Chassis type, what slot the CPU is in, etc? I think for most setups the addressing after the IP address would be ",1,0" for backplane 1, slot 0. 

 

Eric

0 Kudos
Message 32 of 193
(12,117 Views)

Eric,

        I put the values you said into the IP address and I have communications.  Thank you.

 

WD Maas

0 Kudos
Message 33 of 193
(12,115 Views)

Wayne, 

 

Does this mean you are reading your tags from the PLC?


Ryan

Ryan Vallieu CLA, CLED
Senior Systems Analyst II
NASA Ames Research Center
0 Kudos
Message 34 of 193
(12,109 Views)

Hi all,

 

The download file for this project has been updated to a new version with some exciting new features. We have listened to your feedback and have added some items we think you'll like.

 

The new features supported are:

 

  • PCCC explicit messaging support using SLC500 typed read/writes. This will allow you to read and write integer and float register files on SLC500-series and MicroLogix controllers with an Ethernet connection.
  • I/O Data connection support. Create data assemblies on the LabVIEW system that can be connected to as remote I/O using PLCs such as the ControlLogix. This allows implicit repetitive data transfers at rates as fast as 1ms.

 

 

Again, please let me know if you any questions or comments about this update or this support in general.

 

Thanks,

Eric G

National Instruments 

0 Kudos
Message 35 of 193
(12,051 Views)

Eric,

         I have been successfully reading the tags and also writing to the tag addresses.  Thanks again.

 

WD Maas

0 Kudos
Message 36 of 193
(12,021 Views)
That's great news, Wayne!
Ryan Vallieu CLA, CLED
Senior Systems Analyst II
NASA Ames Research Center
0 Kudos
Message 37 of 193
(12,014 Views)

I am new to this forum

I have a compactlogix processor

panelview 1250

I am using 3.6 AI with the add on for enet/ip

I have had the unsupported error

I also cannot import the l5k my tags export as csv

also do i need to add the camera as a module to my I/O tree?

If so what are the settings?

I am hopefully going to be attending the seminar in overland park KS

0 Kudos
Message 38 of 193
(11,998 Views)

Castironut,

 

You might want to move future posts regarding the VBAI EtherNet/IP Addon to the Machine Vision discussion group as that is where support for VBAI resides.

 

As for your error, it would be useful to know the exact error you are receiving. One common issue is that while you have installed the VBAI 3.6 EtherNet/IP addon to your host system, your SmartCamera (or other VBAI system) has not been updated with a new image with the new functionality. Within VBAI you need to go to the system and deploy the new image that was installed via the addon that is labeled to have EtherNet/IP support included.

 

Within RSLogix5000, the Tools->Export only exports to CSV format. However, the File->Save does let you save an L5K file. In general, importing the tags is a convenience, but if you know the names and types of your tags you could always add them manually.

 

Within VBAI 3.6 with the EtherNet/IP addon, only explicit messaging is currently supported. This means that you do not add the camera into the I/O tree.

 

Hope this helps,

Eric 

0 Kudos
Message 39 of 193
(11,993 Views)

I did get the target updated with the addon file

I am trying to communicate with a compactlogix plc

Attached is a screenprint of the error, which seems to be a common one in this forum

My dropdown still shows only csv but i will explore that later, for now i am just trying to get a test tag to work

Thank you so much for the quick response.

0 Kudos
Message 40 of 193
(11,987 Views)