From 04:00 PM CDT – 08:00 PM CDT (09:00 PM UTC – 01:00 AM UTC) Tuesday, April 16, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Additional NI Product Boards NI ELVIS Topic

NI ELVIS

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

NI ELVIS III IV Analyzer, "The IV Analyzer cannot generate the voltage you specify. Make sure your test device matches the SFP setting."

NI ELVIS III IV Analyzer, "The IV Analyzer cannot generate the voltage you specify. Make sure your test device matches the SFP setting."

‎09-05-2019 04:25 PM

My name is Tae. My school electronics course uses the NI ELVIS III.

image.png

I plugged a 1N4006 diode on the DUT(+), (-) port correctly. However, I get an error saying

The IV Analyzer cannot generate the voltage you specify. Make sure your test device matches the SFP setting.

 

How can I solve this problem? I wish to test the voltage range up to 2V with the 1N4006 diode.

 

P.S.) What does DUT(+) stand for?

0 Kudos
Message 1 of 1
(2,205 Views)
Reply