Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
01-10-2019 12:10 AM
公司DC發電機測台使用PCI6259卡,目前校驗人員執行校驗程序時發現,在未輸入外接電壓時,校驗測試項目已顯示有電壓值(正常應0V),經檢測隔離拆除DAQ卡外接線路,銷驗測試項目仍存在電壓值,請問有何方式可測試DAQ卡好壞?是否提供檢查建議,謝謝!
Solved! Go to Solution.
01-10-2019 09:31 PM
您好，請問顯示的電壓值是多少？
在未輸入外接電壓時，電壓值不一定為0V，如果要測試是否正常，先輸入指定電壓，再看顯示的電壓值是否正確。假設想讀取0V值，可以考慮把AI接AI GND。
01-10-2019 11:14 PM
感謝回應,不管外加電壓多少V,顯示電壓值無變化,後來上NI官網(http://www.ni.com/download/daq-diagnostic-utility-2.1/2244/en/)下載DAQ測試軟體(DAQ Diagnostic Utility 2.1 )測試結果是類比輸出故障,與測台故障情況相符,確認DAQ卡故障,謝謝!
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!
