Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
02-07-2014 01:36 AM
使用labview幾年了,但是總感覺不是太專業,怎樣才能深入掌握呢?
08-22-2018 12:14 AM
Why no response.
其实提升有方法:
多练,多看,多积累
其实自从NI的服务变差后,不怎么用 labview 了,现在有很多很好用的软件
08-22-2018 12:31 AM
@yvan.guo wrote: Why no response.
Because you posted 4 years ago in the English forum in Chinese language (instead of here).
No need to revive such an old post.
Do you still have a question?
08-22-2018 01:32 AM
When I measure the Voltage 0 V by the NI 4070-PCI,there is -0.01 V ;I don't know which one cause this:
the equipment ,the product or the card 4070.
08-22-2018 01:48 AM
@yvan.guo wrote: When I measure the Voltage 0 V by the NI 4070-PCI,there is -0.01 V ;I don't know which one cause this: the equipment ,the product or the card 4070.
Another (more likely) possibility is incorrect connection/termination/calibration, etc.
This is not a LabVIEW programming question, but a hardware question. You should ask in one of the hardware boards.
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!