10-31-2006 11:20 AM
11-01-2006 04:40 AM
I have added a quick copy of the ms9 file and saved it as an msm. It can be found at http://www.studentperks.co.uk/counter.msm
Hope this helps
11-01-2006 05:59 PM
I just simulated your circuit as you have it and it doesn't seem to work correctly. I replaced the word generator with the function generator and it cycled each output the way it should. Can you tell me if there is a reason to use the word generator?
On a side note. The MR (reset) has to be close to ground. What I do is tie this to ground with a 1K resistor. This makes sure that it is grounded and awaiting a reset high from somewhere else in the circuit. May not be necessary, but wouldn't hurt to have it this way to be on the safe side.
11-01-2006 06:26 PM
11-02-2006 04:14 AM