11-20-2019 02:02 AM - edited 11-20-2019 02:06 AM
Laying tracks using any of the line tools often results in the gap between the track and the pad to which is connected being below the minimum track-gap value or 'Clearance to Trace' value set in the pad configuration.
In the attached screen grab the min values are set to 0.128mm whereas the gap trace-to-pad is 0.09mm which causes slivers of copper, and trace lifting during manufacture.
05-21-2020 03:43 PM - edited 05-21-2020 03:44 PM
Hello spoof,
Could you please send me screenshot of all rules you have set?