Multisim and Ultiboard

cancel
Showing results for 
Search instead for 
Did you mean: 

Ultiboard 'Follow Me' DRC violations

Highlighted

Laying tracks using any of the line tools often results in the gap between the track and the pad to which is connected being below the minimum track-gap value or 'Clearance to Trace' value set in the pad configuration.

 

In the attached screen grab the min values are set to 0.128mm whereas the gap trace-to-pad is 0.09mm which causes slivers of copper, and trace lifting during manufacture.

0 Kudos
Message 1 of 1
(104 Views)