Multisim and Ultiboard

Showing results for 
Search instead for 
Did you mean: 


I'm unable to change what the AC power sources measure in I have vpk but I cant change it to vrms

0 Kudos
Message 1 of 2


Hi Lazlo123,



If you are using Multisim Live and you are referring to AC Voltage/Current source, the value cannot be changed to rms. You have to multiply the rms value by √2 and use the result as peak value. If you are referring to measured values of a probe, rms value can be displayed by enabling Periodic measurement. This is done by selecting the probe, opening the Configuration pane, then checking Periodic in Measurement labels.



Best regards,

G. Goodwin


0 Kudos
Message 2 of 2