Multisim and Ultiboard

cancel
Showing results for 
Search instead for 
Did you mean: 

Full wave rectifier

Hey, 

I dont have that much experience with multisim but if someone can help me to explain what is going on in terms of voltage wise , 230v 50hz going in displays 325v rms value which then gets transformed down to 12.1 v showing  17.19v rms.....As it should 

 

But after rectification it displays + this for dc when theoretically it should be less because of the diodes? and for the oscilloscope showing the measured voltages at 25v .. i have no idea why or where the dc oscilloscope value and the dc measured value has come from ?

 

 

Untitled.png

 

 

0 Kudos
Message 1 of 1
(1,836 Views)