04-29-2019 10:02 PM
Hi all
I am using Multisim 14.1 Education Edition and DSDB and I want to build a circuit according to the this documents in multisim. However, I cannot find components like Resistance,PNP, VCC and so on. How can I fix this problem?
The software list is shown as below:
Solved! Go to Solution.
05-02-2019 02:23 AM
Hi Zoe,
I am not sure whether this problem is because it is in PLD mode, but usually you will be able to find resistors in the Basic group.
05-04-2019 07:51 PM
Hi Carmen
Thanks for your reply.
According to the documents I mentioned before, components like tesisrors should exist. So I want to figure out what is wrong with my operation. Thanks again for your help!
Best regards
05-06-2019 04:54 AM
Hi Zoe,
Just wondering whether your project is created using
or
From this tutorial , when you create a PLD Design, the components shown (PLD mode) is similar to your screenshot.
Best regards,
Carmen
05-06-2019 10:44 PM
Hi Carmen
Thanks for your reply!I figured out what went wrong with my operation. :) There are two mode in the tutorial, and I mixed the Simulation Schematic and the PLD Schematic.
Have a nice day!