From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Multisim and Ultiboard

Showing results for 
Search instead for 
Did you mean: 

Ammeter/Voltmeter Indicator Displayed Precision

Go to solution



I was wondering if there was a method to increase the displayed precision of the ammeter and voltmeter indicator components (components AMMETER_V, AMMETER_H, VOLTMETER_V, VOLTMETER_H, etc.) such that it provides a similar level of displayed precision to that of the multimeter instrument (Multisim 13.0)? Thank you in advance for your help.



0 Kudos
Message 1 of 3
Accepted by topic author al10

Hi Al,


You cannot change the ammeter and voltmeter indicator output precision, what you can use instead is the measurement probe. The measurement probe is located on the Instrument toolbar.  When you double-click the probe then select the "parameter" tab, there is an option to setup the output precision.


Look at this video to learn how to use the probe:

Tien P.

National Instruments
0 Kudos
Message 2 of 3

Thank you for the feedback Tien. I will probably use either the measurement probe or the multimeter instrument as an alternative. Thanks again.




0 Kudos
Message 3 of 3