Multisim and Ultiboard Idea Exchange

Community Browser
cancel
Showing results for 
Search instead for 
Did you mean: 
Post an idea

This is a great circuit simulator especially for those on tight budget, but 25 components seem low and really limits the usefulness to the free version. Some other web based simulators do not have this restriction and some have no limit on components at all. Please consider making the free version with less restrictions with this I suspect you would bring along more interest in NI in general.

Thank You 

Thomas Zaprzalka

The default settings for an LED in Multisim Live don't match normal LED characteristics. I appreciate the ability to adjust the parameters for a given exploratory circuit. But the default should be what is most commonly seen in real life, not something that is not likely to exist.
When my students use a physical LED, the knee voltage is always around 1.5V. The takeaway is, that although it is a diode, not every diode has a .7V knee voltage. In Multisim 14 it is easy for them to see this.
When they use Multisim Live, unless they are given specific instructions on the parameters to change, they will come to the conclusion that all diodes use .7V.
It would be much better to set the default for real life and let the engineers adjust it if needed. 

I am a university lexcturer and have  alarge number of Multisim 14 files that I use in teaching. I try to encourage students to install Mutisim on their own computers (it is available under our site licence), but most are not happy to do this for many reason including different OSes, lack of disk space etc. etc. . However, Multisim Live is the answer - but i need to be able to transfer my design across to it.

 

It would also be useful for me personally as I use a Mac for most things and have to revert to a PC for MS 14 😞

 

Please add an import function - you already have an export function 

Hi, this is Dr.R.Senthilkumar, Assistant Professor, Department of Electronics and Communication Engineering, Institute of Road and Transport Technology, Erode, INDIA.

 

Here I wish to share my circuits designed for analog and digital circuit experiments.

 

multisim.com/contributors/403990-rsenthileceirtt

 

 

Hello,

 

Recently, a Monte Carlo Simulation was run, testing and changing the value of 12 resistors on a simple circuit. But the computer crashed rounding the 8k samples stating the error:

 

 

SR-3310283 - Multisim error.png

Changes on the resistors, power sources and simulations options were made but still, the tool was not able to handle at least 20k samples on the same run. The computer used had 40 cores and 64GB of RAM.

 

It will be a great improvement to the tool if the memory could be increased or even creating a 64-bit application.

 

Thanks.

 

Hi, i am a inventer building and winding my own coils

since your program is perfect for testing differant windings i have a few things i want you to add

 

multilayers sow for instand a 4 layer transformer

select with type of wire and the gauge witch automaticty calculates the ohms

the shape of the coil turoid or tesla coil like

the core itself, i would like an option to use a micrometalmix core or an aircore

 

thanks in advance

I'd like to have an option for easily copy-pasting customized SPICE options from one Active Analysis to another. Either through saving to a file and loading to the options of another analysis, or simply as a "copy settings from another analysis" button.

 

It would also be nice to have a way to collect/save known working option-sets for various types of designs, separately from the actual design files.

 

1. Increase Width of all traces together in the grapher.

2. Option to choose axis variables in the grapher, for example instead of time in the x-axis, I need some circuit voltage, for this option the simulator should simulate for all circuit variables, and after completion of simulation, the user could change the axis variables as desired. ( In PSPICE it happens the same way, and its useful)

3. When inductors are coupled using Inductor Coupling Block, then those inductors should be assigned dot polarity, same should also be done for the transformer models.

4. When I perform Transient, DC Sweep or Parameter Sweep analysis, all the selected output variables are plotted on the same graph, this is good for most of the times,
but sometimes I desire them to be plotted on 'Different Graph but on Same Graph Page' and I know this can be done by copying the original graph and paste it on the same page and then deselect the unwanted variables, which is tedious work. So there should be an additonal option to plot the variables on 'Different Graph but on Same Graph Page'. Also user should be able to change the bottom axis range of all graph together for easy comparision.

5. Is it possible to incoporate the datasheet of components within the multisim, without visiting manufacturer's webpage?

6. I desire the multisim to create backup of all custom setting made to it (for example Keyboard Shorcuts), so that I could restore it in case of new installation.

7. Multisim Viewer for viewing the schematics and simulating them

So far so good.

It would be awesome if Multisim Live included also the Multimeter feature, as the PC software.

 

Cheers

i am looking forward to see sensors and transducers in Multisim, for example models of thermocouples, NTC and PTC , LDR, even ultrasonic sensors  and LVDT can be easily added to Multisim. 

also i am waiting to improve the microphone model so that we can use it immediately in the circuit.  Further more, we are looking forward to Arduino in multisim.

 

regards

I am using Multim Touch form the applestore and I am very satisfied. But...

How about a Pro version of Multisim Touch with a price tag around 30.0 U$S but with more capabilities

like being able to use self-defined models, having some more components form the beginnig and being able

to exchange files (like models for instance) over iTunes in the App section.

I think educators and hobbyst would most likely be very inetersted.

 
 
 

I need to make a circuit that controls the speed of a motor from 0% to 10% using a PWM and that speeds up to full speed in around 10 seconds and slows to 0 in the same time. This is what I've got so far but I'm struggling with the timing. Can anyone help/advise?

Here is my circuit. Be default max value of time scale is 10 mSeconds. I tried to change to 50 mSeconds, but keep reverting to 10 mSeconds. Is there a workaround?

Hi, 

 

It is an exhausting enough experience importing netlist files from colleges who do not use NI. But why NI does not take the time and some effort to provide an export file option to make the analyzed circuit data MATLAB ready?!

This way, I can recover some of the time the lost setting up the project (almost from scratch) on Simulink, and and complete their task on MATLAB without, additional overhead.   

This simulator is very good. My entire class is using this simulator for my practical purpose. But some components are missing like :-

1.) Square wave 

2.) 7 segment display

3.) 7 segment display with decimal

 

Please add these components it will be highly helpful.

Thankyou. 

Possibility to connect a relay and a contact related to the relay in the circuit diagram with the name of the relay.

It's possible to select, edit, and place a net bridge footprint in Ultiboard (that connect two different nets, such as analog and digital ground), but there is presently no way to create a net bridge component in Multisim to complete a schematic that exactly matches and forward annotates to a desired board layout.  At least some other software packages (e.g. Altium) do offer such a component.  The ability to create such a part in Multisim would make for a much cleaner process, including design verification.

The following problem has been detected in Labview communication with Multisim:
When a new instance of Multisim is connected to Labview, and several operations are performed on it, the time it takes to do these operations increases progressively each time an operation is repeated. The time increases in each and every one of the operations that are performed on the open instance: measure, place components, etc ... The increase of time is significant since an operation that first time takes 0.5 seconds after several repetitions can take more than 5 seconds.
A temporary solution until you fix the problem is to close the connection with Multisim and re-instantiate a new connection.
Download All

There are certain types of semiconductors (such as thyristors) which fail to operate correctly or cause errors/crash unless specific simulation settings are chosen. The requirements for these settings are made known by NI techs after sending them the circuit (which works fine on the bench). Avoid having to go through NI tech support for these types of components to make known good designs operate correctly under simulation by adding the simulation settings criteria to a configuration file that associates the settings with the troublesome components and alerts the user to the requirement thus avoiding a negative simulation experience requiring tech support for the unsuspecting user. It could be a flag added to the model.

Can Multisim do a temperature sweep in DC analysis? If not, this should be added