From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
09-20-2006 12:07 PM
09-21-2006 01:43 PM
09-21-2006 02:04 PM
Thanks for the help. I have not used DAQmx before and I've been avoiding it because I didn't want to deal with the learning curve. If DAQmx gives more direct control over gain settings then maybe it's worth the extra time to get up to speed. I don't know the details of how the 6052 works, but I find it fairly incredible that if I'm scanning a multiplexed signal on a single 6052 channel at 100 kHz or whatever, that it can switch the gain (from 0.5 for 10V inputs to 1 for 5V inputs) on a per-scan basis.
Thanks!
09-22-2006 10:36 AM