Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

problem with waveform generation (PCI-MIO-16E4)

I would like to know why I get an error message when I generate a 40000 samples signal although the card (PCI-MIO-16E4) may transfer 1MS/second. I am not familiar with data acquisition with Labview and my VI (attached) may be wrong. I have also attached the error message I got. Thanks for your help.
Download All
0 Kudos
Message 1 of 3
(2,111 Views)
First test the board using measurement and automation explorer.

The VI you posted had all zero's in the controls, what settings are you using?

Also, check to make sure the board can handle a buffer that large. If not you may have to keep the output buffer filled while the I/O is running.

Keep us posted with new questions or updates.

Ben
Retired Senior Automation Systems Architect with Data Science Automation LabVIEW Champion Knight of NI and Prepper LinkedIn Profile YouTube Channel
Message 2 of 3
(2,111 Views)
Hello,
Since you are new to Data Acquisition with LabVIEW, I would suggest you to take a look at the wonderful examples on Anaog Output that are available in LabVIEW. You can see them by going to LabVIEW Help>>Find Examples.

Sincerely,
Sastry V.
Applications Engineer
National Instruments
0 Kudos
Message 3 of 3
(2,111 Views)