11-16-2015 03:25 AM
Hi all,
I would like to know if I can use ni pci 6229 with ni-scope soft? I didnt find any information about that.
Thank you,
Dima.
Solved! Go to Solution.
11-16-2015 03:29 AM
11-16-2015 03:30 AM
what do you mean by scope hardware?
11-16-2015 03:41 AM
11-16-2015 03:45 AM
this is very expensive. I found something else: http://www.ni.com/virtualbench/buy/.
But interesting thing if I connect enter from functional generator into the ni-6229 I didnt see the signal? or I should build a program to see this?
11-16-2015 06:09 AM
11-16-2015 06:13 AM
this is what I should do?
http://digital.ni.com/public.nsf/allkb/5413F392D88326148625746B006745C5
11-16-2015 06:17 AM
So Dennis,
If its all right and my computer sees this card then I can write a program to determine the frequency of the signal and ect. But once again question: can I connect functional generation to the ni-6229 through the connector block?
Thank you.
11-16-2015 06:50 AM
11-16-2015 07:10 AM
you are right. it shouldn't be a problem to connect it. the functional generator is oor-x 311.
its a regular input of 50 Ohm. Anyway my goal is to measure a signals with ni-6229. I would like to write some kind of program to simulate a simple scope with that card. just to see the sinusoidal signals.
I made connections with BNC.
Thank you.