Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

need a new AMP connector pn 182482A-01

I am looking for a cable assembly (AMP part number 182482A) for NI-6036E analog data acquisition.  I currently have a 1 m long cable assembly.  I mounted the power supply and other DAQ circuitry in a box.  I would like to have a shorter cable to run inside the box, which would mate with a longer cable at the box wall.  Ideally, I would like to have one cable that is about 6 inches long and another that is about 6 feet long.  Please let me know where I can purchase these types of cables.  They are difficult to find on the NI website.
 
Thanks,
 
Heather Humphreys
0 Kudos
Message 1 of 4
(3,692 Views)
Heather,

Which DAQ card are you refering too, there is a PCI and a PCMCIA version of that card, and they use different cables.

-GDE
0 Kudos
Message 2 of 4
(3,672 Views)
I have the PCI version.  I don't know if it will help, but just to make sure it's clear, the part number that I included in my last message was the part number for the current connector.
 
Thanks.
0 Kudos
Message 3 of 4
(3,656 Views)

Here you go, here is a product page with the cables that should do the trick. Hope that helps!

-GDE

 
0 Kudos
Message 4 of 4
(3,648 Views)