From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

configuring AT-MIO

After installing the AT-MIO DAQ in the PC, I would like to configure it
using WDAQCONF.EXE I get a message saying that nidaq32.dll is needed. It
is said that this library should be in the windows or the windows/system
folder. It is actually the case. So what could I do to manage to
configure the card using WDAQCONF.EXE ???


Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
0 Kudos
Message 1 of 2
(4,184 Views)
I don't know the history of the machine here, but it sounds as if you might
have a situation where portions of multiple versions of NI-DAQ (the driver
software) are installed, causing a problem. WDAQCONF is actually a pretty
old configuration manager, not used since (I believe) NI-DAQ 5.0. The
latest NI-DAQ version is 6.5.2, but you might need to go back to 6.1.1,
depending on your exact AT-MIO card.

Your best bet will probably be the following:

1) run any NI-DAQ uninstallers that you can find on the system and remove
any NI-DAQ folders
2) install the latest version of NI-DAQ that is compatible with your card;
I'd advise using these excellent Web pages for step-by-step info on
installing, NI-DAQ versions, etc:

http://www.natinst.com/support/trouble/daq/

If this fai
ls, you may need to contact NI's technical support.

Best Regards,
John Lum

berchemin@my-deja.com wrote:

> After installing the AT-MIO DAQ in the PC, I would like to configure it
> using WDAQCONF.EXE I get a message saying that nidaq32.dll is needed. It
> is said that this library should be in the windows or the windows/system
> folder. It is actually the case. So what could I do to manage to
> configure the card using WDAQCONF.EXE ???
>
> Sent via Deja.com http://www.deja.com/
> Share what you know. Learn what you don't.
Message 2 of 2
(4,184 Views)