Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Using an acoustic transducer with USB-6212

Hello everybody,

 

I have an acoustic transducer and the USB-6212. My objective is to use the USB-6212 to send a signal to my transducer using the NI-DAQmx software to play the sound. Since, i've been trying a lot without results i would appreciate it if someone could explain the process in detail since i'm not very knowledgeable of this kind of equipment.

 

Thanks in advance. 

0 Kudos
Message 1 of 2
(1,914 Views)

Hello aqua207,

 

The best way to learn how to use one of our equipment is by looking at the proposed examples:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kK9ySAE&l=fr-FR

 

You will find a large library of optimized examples done by R&D.
If you are not using LabVIEW, you will find plenty of topics on internet presenting sample codes you could adapt:

https://stackoverflow.com/questions/18229196/ni-usb-6211-reading-analog-voltage-input

 

Have a very nice day 🙂

 

Armando

0 Kudos
Message 2 of 2
(1,878 Views)