Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Using PCI-6221 Digital Output to perform GMW 3172 Nov 2012 Section 9.2.18 Switched Battery Lines

Greetings all! So glad I figured out how to post my question...

 

I am trying to program a simple digital waveform out a PCI-6221 or PCI-6132 S Series, the timeing for this in the micrseconds. 

GMW 3172 Nov 2012.PNG

 

 

Code for switched battery lines.PNG

 

Problem is I can not get it out to the PCI card.. I got everything else completed, but have not been able to read it out my PCI card.. any suggestions?

Thanks all for any help given.

Message 1 of 6
(3,637 Views)
Don't use 1Samp mode.
Message 2 of 6
(3,626 Views)

can't believe that I missed that... 

I changed it to N Sample Waveform, but still am not seeing anyhting on the digital output. any other suggestions? 

Thanks for your help!

0 Kudos
Message 3 of 6
(3,608 Views)
All of your setup is hidden in the task that you created so I have no idea what else might be wrong. Do you get an error?
Message 4 of 6
(3,598 Views)

should it be a task? I have it as a Global Channel.

 

I am not recieving any errors but here is the NI Max Configuration.NI MAX Setup.PNG

0 Kudos
Message 5 of 6
(3,583 Views)
It looks like the digital channel is set for a software timed single sample. If you create a task, you can specify timing. There are also examples that you can look at where the timing and other configuration is set on the block diagram. You need to provide a clock source and use the correlated I/O pins for a hardware timed output.
Message 6 of 6
(3,576 Views)