Using MCC DAQ with Labview

[taurusubc]

Hi

has anyone used MCC's USB analog DAQs with labview? Does it work well?

[AnalogKid2DigitalMan]

I have no experience with MCC's HW or SW.

But, MCC hardware ships with a CD that has libraries for LabVIEW.

See:

http://www.measurementcomputing.com/download.htm

I believe NI acquired MCC 1-2 years ago.

[Ima U]

Hi,
AnalogKid is correct. MCC’s USB analog DAQ boards can be programmed with LabVIEW. It is not as intuitive as programming an NI-DAQ board but it can be done and it works. There is a Universal Library for LabVIEW CD that should have come with your MCC board. If you don’t have it you can download it from the following link:
http://www.measurementcomputing.com/cbicatalog/cbiproduct.asp?dept%5Fid=259&pf%5Fid=1360&mscssid=WH6P0GM2Q7U19H6LWM8RJ1CR979N11F1
If you have LabVIEW questions feel post on the forums, otherwise if you have hardware questions feel free to contact MCC about them. Have a great day!

Ima U.
Applications Engineer
National Instruments

[taurusubc]

Thank you for replying to my query. I have downloaded the software and looking into using it for the MCC board.

[Ima U]

You are welcome. I wish you the best in your application.