From Thursday, May 23rd (05:00 PM CDT) through Friday, April 24th (1:30 AM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to read voltage correctly from photodetector.

Try measuring the photodiode with only the multimeter and see what voltage is output.  Also, are you measuring across the 50ohm shunt resistor with the DAQ card?  What is the current going into the shunt resistor from the photodiode?

Regards,
Jordan F
National Instruments
0 Kudos
Message 11 of 11
(745 Views)