Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to detect 7842r on openSUSE Leap 15.0 linux kernel

I installed the drivers on the linux kernel 4.9.115-rt93-lp150.11-default (patch) but when I run `lsni -v` no RIO board is detected.  Help!

 

0 Kudos
Message 1 of 7
(2,726 Views)

Could you verify this document http://www.ni.com/product-documentation/54754/en/  to confirm that you follow its instructions correctly when installing the drivers?

 

 

0 Kudos
Message 2 of 7
(2,693 Views)

Yes! 
I am required to setup two cards, NI 6704 and NI 7542r. The 6704 was detected via command `nillsdev -verbose`.

The 7542r was not detected when i tested out command `lsni -v`
lspci also did not show the necessary 7542r. I am guessing the board is not working. 

0 Kudos
Message 3 of 7
(2,677 Views)

So these two cards are being used in a PXI chassis with a PXI controller right? 

Could you tell us the controller model?

I would like to verify the compatibility of our products to each other and also the compatibility with openSUSE Leap 15.0. 

 

http://www.ni.com/product-documentation/52866/en/

This document has a table to compare PXI and Linux Desktop Operating System Compatibility. OpenSUSE Leap 15.0. is not listed there. 

Could you use a supported version of OpenSUSE?

 

This is just to ensure that the software environment is supported so we can rule out any issues on that layer. I would rather make an extra test than have you purchasing a new PXI card without necessity. 

0 Kudos
Message 4 of 7
(2,668 Views)

I am using it as a PCIe not a PXIe and directly connecting it to the CPU/Motherboard.

Yes from the link you shared, Leap 15.0 is not mentioned. Although Leap 15.0 is the latest OpenSUSE version and I would prefer to stay on this version since the previous versions of OpenSUSE had other software compiler issue for the application I am using.

 

Apologies for the late response.

0 Kudos
Message 5 of 7
(2,644 Views)

Update

when I execute the command 

lspci

I get the following result

b4:00.0 Unassigned class [ff00]:National Instruments PCIe-7842R

 Can you explain what this means?

0 Kudos
Message 6 of 7
(2,640 Views)

Remember that Current Support for Linux Distributions is  openSUSE 42.2, 42.3

http://www.ni.com/product-documentation/52786/en/

Message 7 of 7
(2,615 Views)