Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

USB on myRIO FPGA

I would like to access the files from the USB plugged on the myRIO USB port through the FPGA but it is not included in the personalities. How can I do this? Thank you.

 

Also, why are there no blocks relating to sound processing (.wav) when working with the FPGA target VI?

0 Kudos
Message 1 of 4
(2,656 Views)

Hi studentonproject,

 

The USB port is actually accessed through the real-time system. The user guide has a diagram on page 3:

 

http://www.ni.com/pdf/manuals/376047a.pdf

 

As for interfacing with a flash drive, our myRIO Project Essentials Guide covers using USB flash drives:

 

http://www.ni.com/tutorial/14621/en/

 

This includes a link to example VIs that will help you get started.

 

Cheers,

Ryan

0 Kudos
Message 2 of 4
(2,611 Views)

Thanks for your reply!

 

Is there a way to send data from the real-time system to the FPGA?

0 Kudos
Message 3 of 4
(2,589 Views)

Hi studentonproject,

 

Take a look at this Tutorial. It gives an introduction on how to create an application that communicates between the FPGA and real-time system:

 

http://www.ni.com/tutorial/52030/en/

 

Cheers,

Ryan

0 Kudos
Message 4 of 4
(2,576 Views)