Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

USB DAQ 6008 not able to connect

hi, need help with connecting DAQ 6008 device to my computer. kindly help to source the drivers and interface software. I downloaded NI MAX and the device does show up there, but doesn't connect. Am using win11 on i5. 

 

actually this is device I bought in 2005, but for long it was not used. Now I need it to check by Arduino project. the device is usbDAQ/108.

 

so first question, is it possible to use this CEC device with NI software, knowing that originally its from NI.

secondly where I can find the driver and software. 

 

 

0 Kudos
Message 1 of 6
(627 Views)

You need NI-DAQ™mx to use USB-6008.

For the programming, you can use LabVIEW or a text-based programming language (C/C++, .NET, Python). If you are using it for non-commercial and non-academic purposes, you can use LabVIEW Community 

-------------------------------------------------------
Control Lead | Intelline Inc
0 Kudos
Message 2 of 6
(606 Views)

than Zyong, tried didn't work. am attaching the screen shots. the device appears in the list, but no connecting. I found a very old copy of software, I think this was from 2010...

0 Kudos
Message 3 of 6
(585 Views)

There are two USB DAQ devices from your images.

USB-600x is from NI and you can use the NI-DAQmx driver to detect it.

CEC usbDAQ/108 is not made by NI but by company CEC. Seems like the company is gone so I am not able to find anything about the driver for this device online. I found a very old thread saying that you might be able to use DAQmx Base with it, but it is not officially supported. Labview 8 demo - aquiring signal

-------------------------------------------------------
Control Lead | Intelline Inc
0 Kudos
Message 4 of 6
(566 Views)

hi, the CEC daq is 6008 from inside, so I thought it might work with NI drivers. Yeh, CEC is gone or changed. I do have the old software which came with it, doesn't work with Win10 or 11. I tried NI mx base, but no luck.  

0 Kudos
Message 5 of 6
(555 Views)

If you're sure, there is a USB-6008 inside your CEC DAQ, then sure, DAQmx is the driver.

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 6 of 6
(548 Views)