Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

USB-6341 not on simulated devices list

Solved!
Go to solution
Highlighted

I want  to create a siumulated USB-6341, but that  model is missing from the list of X-series devices available under the  simulated devices in MAX. All I see under the X-series devices available for simulation are PCIe devices. I have MAX 4.7, DAQmx 9.1.5 and LabVIEW 2010. I have done this on other computers running slightly older versions of software and seen this device on the list, so there must be some software component that I did not install, but I can't figure out what it is. Any suggestions?

 

Richard

0 Kudos
Message 1 of 2
(1,224 Views)
Highlighted
Solution
Accepted by topic author Richard2950

USB X Series devices weren't released until DAQmx 9.2; you'll need at least that verison in order to use a simulated one.

——
Brandon Streiff
ni.com/compactdaq · ni.com/daq
0 Kudos
Message 2 of 2
(1,223 Views)