Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

USB-6008 Plug-in replacement

Hello all.

 

We use the USB-6008 in a machine. Now we need to replace this defective device.

The question is: Is there a channel, where we can buy these modules again, they are no more listet at NI. Or is there a plug-in replacement-module that needs no software-change?

 

Unfortunately there is no possibility at NI Homepage to ask this question, in my opinion a very bad behaviour, but maybe the community can help me?

 

Thanks for any reply

Bosshard

0 Kudos
Message 1 of 4
(1,226 Views)

If you do a search for USB-6008, there is a link there to "Contact Us".  You can probably use that to get a hold of somebody in NI to buy one.

 

But if you are looking for a replacement, it would be helpful if you told us what functionality and requirements you need.  Software-wise, almost any DAQ from NI will use the DAQmx.  You should state what version of DAQmx you are using as well so we can double check compatibility.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 2 of 4
(1,209 Views)

Hi Bosshard,

 

Did you ever find a drop-in replacement for the USB-6008?  

 

Thanks,

Ben

0 Kudos
Message 3 of 4
(1,089 Views)

No, unfortunately not. There was no real help from NI.

Mabe you can find some used parts on market-platforms like eBay.

We switched to a different hard-soft-platform with better availability.

Regards

Urs

0 Kudos
Message 4 of 4
(1,079 Views)