Can anyone confirm the location of pin #1 on the 34 pin connector? I assume it's as indicated on the attachment but want to be sure before I design a custom interface PWB.
You can verify the pinout here:
NI USB-6001/6002/6003 OEM User Guide
Hope this helps!
Thank you for the reply.
I am looking to identify Pin 1 on the NI-USB-6001 OEM connector. If you look at:
the drawing shows dimensions but does not identify pin 1. I found the attached for the NI USB-6000-OEM where pin 1 is identified. I am assuming the identification of pin 1 is the same for the USB-6001-OEM as it is for the USB-6000-OEM. Can you confirm?
Sorry for the misunderstanding. Based on the OEM User Guide for the USB-6000-OEM and the dimensional drawing of the USB-6001-OEM found here:
the identification of pin 1 is in fact the same for the USB-6001-OEM as the USB-6000-OEM.