From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
We're trying to set up a simple oscilloscope using a NI BNC-2110 board and LabView 2013 (SP1). I'm a complete beginner to this software and have only rudimentary knowledge and use of it.
The BNC-2110 is nothing more than a connector block. You need a DAQ board that can do the measurements for you. Depending on what you need to measure, you can probably get away with a simple USB-6000. From there, look through the Example Finder in LabVIEW (Help->Find Examples). There are a few in there for Analog Input.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions Unofficial Forum Rules and Guidelines "Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5