I'm running NI-DAQ 6.1 and LabVIEW 5.01.
I have a PC that contains both GPIB and DAQ hardware and does NOT have
LabVIEW installed. I have another PC with LabVIEW installed but no
hardware. The two PCs are connected across a LAN. I want to be able to
run LabVIEW from the one machine but have the software point to the GPIB
and DAQ hardware of the other machine. I can use the Remote Device
Access (RDA) server to control the DAQ hardware this way, but not the
GPIB hardware. Is there anything similar to RDA that allows me to
control a GPIB card remotely?
I'm not talking about GPIB-ENET. I don't want to convert ethernet to
GPIB. I want to be able to control the GPIB card of the remote PC so
that it can send commands out to other GPIB devi
ces.
Thanks
Patrick Cevasco
Staff Engineer, Microwave
Microwave Medical Systems, Inc.