From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Most Active Hardware Boards Multifunction DAQ Topic

Multifunction DAQ

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

QNX or Linux driver that will DMA from a PCI-6052E

QNX or Linux driver that will DMA from a PCI-6052E

‎03-03-2000 04:36 PM

Hi,
I am planning a QNX or Linux driver that will DMA from a PCI-6052E.
In the readme at
ftp://ftp.ni.com/support/daq/linux/Readme

snip ..
* DMA is not supported at this time. Doing DMA would require
programming the mMITE chip on NI's CPCI/PCI/PXI cards, and as of now
that information is only available under NDA, thus precluding an
open-source release. Feedback on this issue is appreciated.
snip ..

Is this readme up to date? I do need the DMA, and was hoping to get the
necessary info from the Linux code.

cheers -- Rick

--
Rick Leir
Pelyco Systems
rleir at pelyco dot ca replace at and dot


Sent via Deja.com http://www.deja.com/
Before you buy.
0 Kudos
Message 1 of 1
(3,220 Views)
Reply