Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Pci-6225 with scc-68 and tc02 module on connector 1

Solved!
Go to solution

Hello,

 

  I have a pci-6225 card hooked to a scc-68 with a TC02 module for temperature.  If I connect to connector 0 on the 6225 card everything works ok.  But if I connect to connector 1 I get a floating signal between 100 and 200 instead of the actual temperature.

 

  I connected the scc-68 to a PCI-6229 card and it works on connector 0 and connector 1 with no problems.  So is there any way to get the scc-68 work on connector 0 on the 6225 card?  The card passes it's self test, so I am trying to figure out what could be wrong with port 1.

 

 

 

Bryan

0 Kudos
Message 1 of 2
(2,805 Views)
Solution
Accepted by topic author _Bryan

I just figured out why it does not work on connector 1 on the 6225 card.  There is no +5v power on connector 1, only connector 0. 

 

So for a quick test I took the +5v from the scb-68 on connector 0 to power the scc-68 on connector 1, and it seems to work so far.

 

 

0 Kudos
Message 2 of 2
(2,804 Views)