Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

PXI Controller will not boot when 6071E is in chassis. (new problem).

My PXI contoller stopped upon an acquisition error, and then would not reboot until I removed the 6071E card from the chassis. When I put the 6071E back in the chassis the controller again fails to boot.
0 Kudos
Message 1 of 3
(2,676 Views)

Hi,

Are you using a RT controller?

Even we had similar problem with PXI 6071 E, and we found that the DAQ card was faulty.

Regards

Dev

 

 

0 Kudos
Message 2 of 3
(2,668 Views)
I agree.  It sounds initially as though it is a faulty card.  I would try the card in a different slot and if possible, try a different card.  If niether of these solves the issue, then I would call in and RMA the card.
-Jeff P.
National Instruments Applications Engineer
0 Kudos
Message 3 of 3
(2,657 Views)