From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I am new to data acquisition. I installed the driver and could run "test panel" for PCI-MIO-16E-4. What's next? If I just want to sample the voltage difference between two pins on the measurement board every 1 ms and record the data, what is the best way to do it? It seems to me that National Instruments is pretty good providing programming interface. However, do I have to write a program for a simple task like this?
> Hi, > > I am new to data acquisition. I installed the driver and could run "test > panel" for PCI-MIO-16E-4. What's next? If I just want to sample the voltage > difference between two pins on the measurement board every 1 ms and record > the data, what is the best way to do it? It seems to me that National Instruments > is pretty good providing programming interface. However, do I have to write > a program for a simple task like this? > > Thanks a lot. > > Y.