From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Most Active Hardware Boards Multifunction DAQ Topic

Multifunction DAQ

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

PCI-6704

PCI-6704

‎02-03-2002 12:26 PM

I have one question in connection the PCI-6704 to a current driver (the electric diagram is attached, this current driver is simply a voltage follower): I connect the PCI -6704 Pin 34 to V pin in current driver, then How should I connect the pin 68? should I connect it to the ground line in current driver, or I can just leave it alone.

thanks

zhou
0 Kudos
Message 1 of 2
(2,454 Views)
Reply

Re: PCI-6704

‎02-04-2002 10:56 AM

Hello;

I believe you should be ok by connecting pin 68 of the DAQ board to GND of your external circuitry, since you have a unity buffer in between the DAQ board and the circuitry.
Hope this helps.
Filipe
0 Kudos
Message 2 of 2
(2,454 Views)
Reply