PCI-6363 for impedance

[Kentmey]

Hi,

We are working on impedance measurement using the DAQ board as an FRA, generating and recording the frequencies on the card. We are moving into multiple response channels, and therefore need a morepowerful card (the PCI 6221 we were using is starting to exhibit limitations).

We are looking for at least 6 simultaneous channels, and 1 output channel, with the following capabilities:

Read and Generate data from 10kHz to 0.1Hz.

We have been advised about the USB-6363, but we are still open to discussion, let us know if you think of another card, with the same kind of price (1500-2500£). As it is quite a bit of money, we need to make sure it is the appropriate device.

Kentmey

[BenClark]

Hi Kentmey,

The best place to get information on our products is by contacting your local National Instruments Office. You will be able to get a contact number from the following website:

NI contacts: http://www.ni.com/niglobal/