05-24-2006 04:29 PM
05-25-2006 01:03 PM
05-25-2006 07:24 PM
Thank you very much for your response. I see the offset on the AI side of the board and it is configured in differential mode. I see the offset no matter what, if I have the input disconnected or connected. E.g. If I apply a 100 Hz sine it will appear on that channel with an offset of about 2.3V.
Do you think calibration of the board will do the trick?
Thanks a lot and have a good day,
05-26-2006 05:10 PM