08-05-2014 05:19 AM
Dear All
I am using NI-cDAQ 9184 and 2 Module NI-9223(1M) to acquire 6 channels analog input from Acoustic Emission sensors(frequency from 20kHz-400kHz) with external signal conditioning.
Please kindly do let me know how to synchronize using NI-DAQmX? Does NI-9223 support hardware synchronization?
Thanks and Regards
Luong.Tran
Solved! Go to Solution.
08-06-2014 11:03 AM
Hi QuanLuong.Tran,
here http://www.ni.com/white-paper/4322/en/ you can find how to trigger and synchronize different channels. It should work.
Best regards,
CaravagGIO
08-07-2014 05:43 PM - edited 08-07-2014 05:43 PM
Just put both devices in the same task, DAQmx will configure the hardware synchronization for you:
Best Regards,
08-14-2014 09:12 AM
Thanh you so much for your information1
Best Regards
Luong.Tran