From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
There are industrial parts out there specifically for converting between 20mA and 10V signals. As a quick and dirty, you could just use a 500 Ohm resistor in parallel with your motor control (500 Ohm * 0.02A = 10V).
Or you can just get a NI-9263, which can output -10 to 10V.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions Unofficial Forum Rules and Guidelines "Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5