Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

NI 9237 Dsub quarter bridge

Hallo, is it possible measure quarter bridge by NI9237 DSUB?

Thank you

Martin

0 Kudos
Message 1 of 3
(4,125 Views)

Hi,

 

With 9237 Dsub you can measure full bridge and half bridge.

In case you want to measure quarter bridge you will have to do the bridge completion yourself or you can use a 9237 with RJ50 and NI 9944 or 9945 details http://sine.ni.com/nips/cds/view/p/lang/ro/nid/211299 

 

Best regads,

IR

0 Kudos
Message 2 of 3
(4,099 Views)

I know it's a old topic, but I'd give it a go. 

Hello everyone,

I'm working on a research project that involves tensile tests of Titanium samples.

To measure the strain, I have got a NI DAQ 9172 Board with the NI 9237 Bridg and I use 2 wire 350 Ohm resistance gauge.

I have connected the strain gauge in quarter bridge configuration to the DSUB following the hook up scheme in page 14 of getting started guide NI 9237 (https://www.ni.com/pdf/manuals/374186f.pdf).

Lorion_0-1581361796206.png

PC and MAX recognise the board and I see no trivial errors in the configuration, but unfortunately during the test I recorded strains that are way off compared to literature.

Here is the schematic I used to connect the strain gauge to DSUB.

Lorion_1-1581361796222.jpeg

Notes: I used 3 wire to compensate for wire resistance
Strain gauge and dummy resistance are both 350 ohm   

 

Can anyone help?
Thanks

0 Kudos
Message 3 of 3
(2,263 Views)