Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

NI-9191 and Crio-9075

Solved!
Go to solution

Hello..

I would like to know if I can see my NI-9191 Wireless chassis through my CRio-9075?

I have my CRio-9075 connected to a wireless access point and the NI-9191 to this acces point too...

The Idea is to read my NI-9234 input module through my NI-9191 located at 20ft away.. and on the other site I have my CRio with another NI=9234 module to read another machine channels.

Note: I can not use ethernet wires across the trafic lines and this is why I would like to use the NI-9191 and the CRio... I will need to run my application on the CRio and to publish my data with network variables to a Surface Tablet.

 

IS this possible?

Thank you

Checo

0 Kudos
Message 1 of 3
(4,447 Views)
Solution
Accepted by topic author Checo

Hi Checo,

 

That wouldn’t be a supported configuration. The NI-9191 requires the DAQmx driver, which is something you cannot install on a cRIO.

Have you looked into the next HW options?

 

NI 9795:

http://sine.ni.com/nips/cds/view/p/lang/en/nid/210007

 

NI WSN-3202:

http://sine.ni.com/nips/cds/view/p/lang/en/nid/207088

 

Regards,

AGJ

NI

0 Kudos
Message 2 of 3
(4,428 Views)

Hello AGJ_CR..

Yes.. I will move and use the WSN radios for this application..

Thank you for your help ! ...have a good one..

 

Checo

0 Kudos
Message 3 of 3
(4,415 Views)