Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

My PCI-MIO-16E-4 is only showing full scale.

Hi All.

I have set up a PCI-MIO-16E-4 and AMUX-64E on WIN95 machine using NI-DAQ 6.5.1. This system originally went when first setup. The
computer has been moved from its original location and now it doesn't seem to work properly.
What Automation Explorer is now showing, on strip chart, positive full scale irrespective of what the ranges are set to, eg 9.9951
on +10,-10 or 5 on +5,-5. what is also weirder is that on single shot mode it only shows 0.0 also irrespective of the scale.

I believe the problem is with the PCI-MIO-16E-4 because it seems to be happening with or without the AMUX card.

Could somebody please help.

Tim S

Tait Electronics
Christchurch
New Zealand
0 Kudos
Message 1 of 1
(3,529 Views)