Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

I want to increse out volt in 20sec.

Hi.

I use .Net c# and usb-6001.

I want to use the AO increse without timer.

How can i use it?

 

example:

  1. Target
    1. 0 to 10V output during 20sec.
  2. Now
    1. use window timer in c#, increse 0.05V / 0.1sec
  3. Problem
    1. It works stair shape.
    2. Window timer is not correct. (error ± 10ms)
0 Kudos
Message 1 of 2
(206 Views)

You can use the hardware-timed analog output feature to generate an array of ramp signals.

 

santo_13_0-1719410774275.png

This hardware-timed technique is the right way to guarantee you the ramp rate as long as the external device doesn't load the signal beyond the drive capability.

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 2 of 2
(181 Views)