From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Hi all USB 6009 is not compatible with traditional DAQ or DAQmx.How do I generate a continuous waveform on the oscilloscope using this device and DAQMX Base? Any help would be appreciated. Thanks in anticipation. P
Hello pushD, If you have installed NI-DAQmx Base, you should have examples (in Windows) here: Start>>All Programs>>National Instruments>>NI-DAQmx Base>>Examples>>LabVIEW 7.x>>Dynamic>>ao. There are a couple analog output examples there. I would recommend taking a look at those. Hope that helps! -Alan A.
