06-21-2010 09:15 AM - edited 06-21-2010 09:16 AM
Good morning everyone
I'm about to buy a pci 6280 daqcard. However there's still a little doubt about it:
The connector of the DAQ Card, is it male or a female?
I need it to be a male connector, so it can be direct connected to my load-cell cable. But if it's a female connector, I'd like to know if the cable (that I can buy together with the DAQ card) is a male/male connector.
I would really appreciate your help and fast asnwer.
Thanks for the help and see ya.
Solved! Go to Solution.
06-24-2010 03:55 PM
Hello,
The conectors of a PCI DAQ Board are male.
If you have any doubt please contact me.
Thanks.
Best Regards
06-29-2010 08:36 AM
Thanks a lot Lucianogob, this really helps me!
03-31-2020 03:44 AM
This is different from what is described in the NI webpage
https://www.ni.com/documentation/en/multifunction-io-device/latest/pci-6280/overview/
It says it has a One 68-pin female VHDCI connector