Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Hardware spec discrepancy in NI shop listing

Solved!
Go to solution

http://www.ni.com/en-au/support/model.ni-9247.html says that the module is rated for 20 ARMS, but its Getting Started Guide says 50 ARMS.

 

Which is correct?

 

EDIT: I found another one. http://www.ni.com/en-au/support/model.ni-9244.html says 800 VRMS L-L, but its Getting Started Guide says 690 VRMS L-L. It would be good if someone checked through these listings!

Certified LabVIEW Developer
0 Kudos
Message 1 of 2
(2,577 Views)
Solution
Accepted by topic author JKSH

The product listing pages recently got a revamp, and there are still some bugs to shake out. I'll forward this on to the appropriate team. The Getting Started guides and datasheets for the NI 9247 and the NI 9244 both list 50 Arms and 690 Vrms L-L respectively; those values are correct.

 

——
Brandon Streiff
ni.com/compactdaq · ni.com/daq
Message 2 of 2
(2,531 Views)