Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Floating Source on USB-6356

Solved!
Go to solution

Would there be a way to add a 1M input impedance to the USB-6356 device so that an oscilloscope would not have to be connected

0 Kudos
Message 11 of 14
(90 Views)
Solution
Accepted by topic author rocksolidsr

The best option is to get the charge converter from the sensor manufacturer, if you could not do so, you can try adding the 1M load like below.

santo_13_0-1619620917402.png

 

-Santhosh
Semiconductor Validation & Production Test
Soliton Technologies
0 Kudos
Message 12 of 14
(83 Views)

Thank you, yes I have contacted the manufacturer for a quote on the charge converter, but in the mean time I will give that a shot and see how it goes.

 

Thanks!

0 Kudos
Message 13 of 14
(80 Views)

I was able to try that solution and it is working just like when connected to the scope, so that will work until I can get a charge converter!

 

Thanks again!

0 Kudos
Message 14 of 14
(75 Views)